Prestige APS-25-CL User Manual

128-4862A
NOTICE D'INSTALLATION DU SYSTÈM DE SÉCURITÉ AUTO À
COMMANDE À DISTANCE
GUÍA DE INSTALACIÓN DE SEGURIDAD DE AUTOMÓVILES A
CONTROL REMOTO
REMOTE CONTROL AUTO SECURITY SYSTEM
INSTALLATION MANUAL
TABLE OF CONTENTS
Pre-Installation .................................................................................................................................1
Mounting Components ...................................................................................................................2,3
Wiring The System ........................................................................................................................ 3,4
Completing Installation .................................................................................................................. 4
Wiring Diagram .............................................................................................................................. .5
Wiring Reference ............................................................................................................................. 6
Notes .................................................................................................................................................7
TABLE DES MATIERES
Préparation à l'installation ..............................................................................................................8
Montage des Composants ..............................................................................................................9
Câblage du Système ...................................................................................................................10,11
Finition de l'installation .................................................................................................................11
Câblage ...........................................................................................................................................12
Chaîne Porte-clefs ..........................................................................................................................13
Remarque ........................................................................................................................................14
INDICE
Preinstalación .................................................................................................................................15
Instalación de componentes .........................................................................................................16
Cableado del sistema ................................................................................................................17,18
Terminación de la instalación .......................................................................................................18
Cableado .........................................................................................................................................19
Referencia .......................................................................................................................................20
Notas ................................................................................................................................................21
1 0f 22
Model APS-25-CL
Released 7-12-96.
Final Release 9-9-96.
Added French and Spanish 10-3-97.
Rev. A : 12-11-00. Change Schmetic diagrams.

Prestige APS-25-CL Specifications

General

Operating Voltage	12V DC
Door Trigger	Yes
Trunk Trigger	Yes
Hood Trigger	Yes
Starter Kill	Yes
Remote Start	Yes
Keyless Entry	Yes
Panic Mode	Yes
Valet Mode	Yes
Battery Backup	No
LCD Remote	Yes
Shock Sensor	Yes
System Type	2-Way Security System

Summary

Pre-Installation Setup

DIP Switch Configuration

Configure system features: auto lock/unlock, passive/active arming, voltage sense/hardwire.

Channel 2 Output Functionality

Provides an independent hardwire remote output for optional upgrades like remote start or trunk release.

Major Component Installation

Channel 3 Output Feature

Details the additional 3rd radio frequency channel for optional garage door interface.

Door Lock Outputs

Explains negative pulsed door lock outputs and when an interface is required.

Transmitter Programming Basics

Information on factory programming and assigning system functions to transmitter buttons.

Control Module Mounting Guidelines

Select a secure, dry location inside the passenger compartment for the control module.

Siren and Pin Switch Installation

Mount siren in engine bay; install hood/trunk pin switches securely.

Dash Mounted LED Placement

Install LED indicator in the dash for visible alarm status indication.

System Wiring and Connections

Valet Switch Installation Procedure

Mount valet switch for easy driver access, concealed or in the dash.

Power, Ignition, and Ground Wiring

Connect system to constant +12V battery, switched +12V ignition, and chassis ground.

Trigger and Door Input Wiring

Connect instant trigger and vehicle door trigger inputs.

Output Wiring: Siren and Parking Lights

Connect siren output and parking light flash output wires.

Installation Completion Steps

Auxiliary Outputs and Connector Wiring

Wiring for starter cut, Channel 2, valet, LED, and door lock outputs.

Antenna Wire Routing

Extend and route antenna wire for optimal RF signal reception.

Wire Management and Protection

Secure and protect alarm wiring looms from vehicle damage.

Final Operation Check and Customer Handover

Perform final checks and explain system operation to the customer.

Installation Notes and Sketches

Recording Installation Details

Space for custom notes, vehicle specifics, and wiring diagrams.

Additional User Notes

Blank Notes Area

Provides an empty section for user-added notes or custom diagrams.