Prestige APS-OE2B User Manual (English)

To Next Page

The transmitters included with the system have been pre-programmed

at the factory, with each button pre-assigned to control a specific

function of the system. Although the system in the vehicle has either

a 2 or 3 channel receiver, depending on the model, the transmitters

included with the system are capable of transmitting 3 distinct signals.

This allows you to program each transmitter to more than one vehicle

in two car families, and also allows you to change which button(s)

control certain functions of the system.

( Example: Transmitter channel 3 can be programmed to activate

Receiver channel 2. ) Refer to the chart below for access to each of the

transmitter channels, and for the standard factory button assignments.

TRANSMITTER SYSTEM RECEIVER

CHANNEL BUTTONS CHANNEL FUNCTION

1 ARM 1 Remote Arm/Disarm

DISARM & or **Remote Lock/Unlock

**Remote Emergency Panic

2 OPTION 2 * Pulsed Output for Accessories

3 ARM 3 * Switched Output for Accessories

DISARM * Second Vehicle Control

& OPTION

Some of the more common accessories for these additional channels

are;

*AS 9154 Remote Garage Door Interface

*AS 9075 Remote car starter

*AS 9153 Remote window roll up

*AS 9256 Remote trunk release relay

** Only Available With Some Systems

Model : APS-OE2B

128-5544A

1 OF 4

TRANSMITTER PROGRAMMING GUIDE

Released 9-24-99

Rev A: References to the APS-33, 3-6-02.

Need help?

Do you have a question about the Prestige APS-OE2B and is the answer not in the manual?

Prestige APS-OE2B Specifications

General

Type	Car Alarm
Remote Start	Yes
Keyless Entry	Yes
Shock Sensor	Yes
Panic Mode	Yes
Two-Way Communication	Yes
Number of Buttons on Remotes	5
Number of Remotes Included	2
Door Lock Output	Yes
Starter Kill	Yes
Installation	Professional installation recommended
Range	Up to 3000 feet
Compatibility	Universal
Battery	CR2032
System Type	2-Way Security System