To Next PageTo Next Page
Need help?Do you have a question about the Prestige APS-787E and is the answer not in the manual?
Procedure for actively arming the security system using the transmitter.
Method for arming the system actively without audible chirps.
How to arm the system automatically after a set delay period.
Details on the protection features active when the system is armed.
Procedure to silence an active alarm without disarming the system.
Method for disarming the system silently.
Indicators for intrusion attempts when the vehicle was unattended.
How to use the receiver's switch for valet mode operation.
General procedure for disarming the system without the transmitter.
How to disarm the system using the custom override code.
Steps to permanently disable or enable arm/disarm chirps.
How to activate the panic alarm function using the transmitter.
Using the receiver switch to disable remote start functionality.
How to activate the turbo timer mode for engine cooldown.
How to activate accessories using channel 3 of the remote.
How to activate accessories using channel 4 of the remote.
How to activate accessories using channel 5 of the remote.
How to activate accessories using channel 6 of the remote.
How to activate accessories using channel 7 of the remote.
Information regarding the telematic upgrade module connection.
How the system indicates programmed transmitters for security.
Steps for programming new or replacement transmitters.
Guide on how to replace the transmitter's battery.
Regulatory compliance information for the device.
Meaning of dash LED flashes during various alarm states.
Meaning of siren chirps for different alarm events.
Meaning of parking light flashes for alarm events.
Meaning of siren signals related to remote start operations.
Meaning of parking light signals for remote start operations.
General
