To Next PageTo Next Page
Need help?Do you have a question about the Prestige APS-596E and is the answer not in the manual?
Highlights key features of the 5-button two-way security system.
Details on the advanced and secure Spread Spectrum transmitter technology.
Details how to arm the system using active mode with the transmitter.
Explains how to arm the system silently using the transmitter button.
Describes the automatic arming sequence initiated after exiting the vehicle.
Explains the security measures active when the system is armed.
Instructions for disarming the security system using the transmitter.
How to disarm silently and handle the system while it is sounding.
Details how the system indicates triggered events via LED and siren.
Functionality of the receiver's push button for valet and programming.
Procedure to disarm the system using the override switch.
Step-by-step guide to setting a personal override code for the system.
Illustrates the process of programming a custom override code.
How to disarm the system using the programmed custom override code.
Instructions to permanently disable system arm/disarm chirps.
How to activate the panic function using the transmitter.
Details about controlling optional devices via Channel 3.
Description of an alternate output for Channel 3, e.g., for remote start.
Explains how Channel 4 can be used for optional accessories.
Explains the meaning of various icons displayed on the transceiver screen.
Details icons for optional remote functions and upgrades.
How to switch the transceiver between beep tones and vibrate mode.
Details how the system indicates triggered events via icons and patterns.
Describes icons related to chirp disable, door/hood/trunk triggers, and PTN.
Explains how the system alerts to unauthorized transmitters.
How to check vehicle status and internal temperature via the remote.
Enabling automatic engine start based on ambient temperature.
Controlling display illumination and setting timers.
Switching the transmitter between vibrate and tone alerts.
Using the transmitter's timer to track parking meter limits.
Setting an alarm clock function on the transmitter.
Explains icons for transmitter battery level and communication range.
Activating vibrate mode and setting the alarm clock.
Enabling power save mode and using timer functions.
Setting daily start times and automatic start based on temperature.
Describes the meaning of the LED indicator flashes.
Explains the meaning of different siren chirp patterns.
Details the signals provided by parking light flashes.
Instructions for replacing the battery in the transmitter.
Guide for programming new or replacement transmitters.
Information regarding FCC compliance and operational warnings.
General
