Prestige Owner’s Manual User Manual

128-7863
1 of 20
Page 1
Model XR9000
Owner’s Manual
IMPORTANT ! In order to provide you with the highest level of security to your
vehicle, this system is equipped with selectable manual override circuitry. It is
possible that you will need to override you security system if the transmitter
becomes lost, or inoperative due to battery failure. Reading the sections on
"Manually Overriding Your System" is necessary to fully understand the procedure
required to enable your vehicle in such situations. In addition, the chart on the last
page of this manual has a section for the particular features and options installed
in your vehicle as well as the override method selected. Although the default
mode is "Valet Switch" operation, the system can be configured for "Custom
Code" operation for enhanced security. Confirm the override mode selected on
the last page of this manual, and familiarize yourself with the section on it's opera-
tion.
FEATURES :
 1 Two Way 6 Button LCD Remote Control & 1 One Way 5 Button Remote
Control
 Seven Channel Code Learning Programmable Receiver
 External Superheterodyne Transceiver Antenna
 Single Or Two User Programmable W/Separate Control Outputs
 Single Button Lock/Unlock or Separate Button Lock/Unlock or Both
 Remote Keyless Entry With Optional Access Guard (must have power door
locks)
 Selectable Manual Override Mode
 New Enhanced Panic Feature (Any button other than unlock stops siren, no
change to the units state)
 Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit )
 Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect
Off, City Mode)
 Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or
For R/S)
 24 Hour Time Start Mode
 Cold Temperature Start Mode
 2 or 4 Hour Automatic Start Mode
 Parking Meter Count Down Timer On LCD Remote
 Additional Count Down Timer Mode
 Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds
To Engage)
 Improved Custom Code Override, User Selectable and Programmable
 Protected PBLED, (Push Button LED Valet/Program/Manual Override Switch )
 7-Function LED-Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming
 Intrusion Alert With Memory
 Instant Siren Activation
 Starter Disable Output
Long Range Remote Start Security System
With Plug-In Shock Sensor & Starter Disable

Prestige Owner’s Manual Specifications

General

Brand	Prestige
Category	Car Alarm
Document Type	Owner’s Manual
Immobilizer	Yes
Installation	Professional installation recommended
Alarm Siren	Yes
Shock Sensor	Yes
Power Supply	12V DC
Compatibility	Vehicle-specific (check manual for details)
Remote Control Range	Varies by model (typically up to 1000 meters)

Summary

System Overview and Features

Transmitter Security and Options

Code Hopping Transmitter Technology

Explains the advanced security of Keeloq Code Hopping transmitters against code grabbers.

System Operation: Arming

Active Arming Procedure

Step-by-step guide to arm the system using the active arming method.

System Operation: Arming and Protection

Passive Arming Procedure

Details the automatic passive arming process and its indicators.

System Protection Status

Explains how the system protects the vehicle while armed and deterrents.

System Operation: Disarming

Standard Disarming

Steps to disarm the system using the unlock/disarm button on the transmitter.

Silent Disarming

Method to disarm the system without audible chirps from the transmitter.

System Alerts and Override

Intrusion Warning Signals

How the system indicates intrusion attempts via LED and chirps.

Valet and Manual Override

Using the PBLED switch for valet mode and manual system override.

System Customization: Override Codes

Programming Custom Override Code

Step-by-step guide to program a personal override code for enhanced security.

System Functions: Chirps and Panic

Eliminating Arm/Disarm Chirps

How to selectively disable normal arm and disarm chirps from the siren.

Remote Panic Operation

Using the transmitter buttons to activate the panic alarm feature.

Shock Sensor Configuration

Shock Sensor Mode Selection

Adjusting the sensitivity and response modes of the dual-stage shock sensor.

Remote Start and Service Functions

PBLED Safety Control Switch

Temporarily disabling the remote start function for vehicle servicing.

Remote Start Vehicle Operation

Step-by-step guide for remotely starting and stopping the vehicle engine.

Advanced Timing and Function Control

Automatic Start Timer Mode

Setting the vehicle to automatically start at timed intervals for warmth.

Additional Remote Functions (Channel 3)

Activating optional accessories like trunk release via the transmitter.

Additional Remote Functions and Turbo Timer

Additional Remote Functions (Channels 4-7)

Using other transmitter channels for various optional accessory controls.

Turbo Timer Mode Operation

Allowing the engine to run for a set period to cool a turbocharger.

Transceiver Interface and Indicators

Telematic Upgrade Information

Details on upgrading the system for remote control via telephone or computer.

Transmitter Icon Meanings

Explains the various icons displayed on the two-way transmitter's LCD screen.

Transmitter Display and Alerts

Panic Mode and Trigger Indicators

How the transmitter displays panic mode activation and intrusion alerts.

Vibrate Mode and Tone Selection

Toggling between audible tones and vibration for transmitter feedback.

Transmitter Trigger Indicators

Door, Hood, and Trunk Trigger Display

How the transmitter indicates specific entry point triggers (door, hood, trunk).

Advanced Remote Control Features

Accessing Status and Temperature

Checking vehicle status and ambient temperature via the transmitter.

Daily Start Timer and Temp Start Mode

Setting timed automatic starts or starts based on temperature.

Transmitter Utility Functions

Valet Mode, Parking Meter, and Alarm Clock

Using transmitter features for valet, parking reminders, and alarm clock.

Transmitter Icons and Power Management

Battery, Range, and Power Save Icons

Understanding battery status, range indicator, and power saving features.

24 Hour Start Timer and Temp Start Mode

Activating timed or temperature-based automatic vehicle starts.

System Functions at a Glance

Dash LED, Siren, and Parking Lamp Indicators

Summary of system status indicators and their meanings.

Feature and Function Settings

Overview of customizable settings for system functions by the installer.