EasyManua.ls Logo

Prestige Platinum APS 996 User Manual

Prestige Platinum APS 996
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model APS 996
Installation Manual
SELECTABLE FEATURES
Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be
certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
RF Programmable Features :
Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps Default
1st DoorL/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L 1 Sec.
2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off
3rd Accy. UL Auto UL Dr. Auto UL All Auto UL Off Auto UL Off
4th Headlights On Arm On Disarm On Both Off Both
5th Passive Locks Passive Active Active
6th Passive/Active Arm Passive Arm Active Arm Active Arm
7th Black/Blue (Aux O/P) Single Pulse As Feature #1 Single
8th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn
9th Horn Chirp 10mS 16mS 30mS 16mS
10th Override Method Custom Code Valet Valet
11th Two Step Unlock On Off Off
12th Chirp Delete From Tx On Off Off
To program these selectable features;
Action System Response
Turn ignition on No response
Press and release the valet switch 3 times 1 Chirp - LED 1 flash
Within 3 seconds, turn ignition Off Short chirp, then long chirp
First Then turn the ignition back On 1 chirp = 1 second door locks
Press transmitter Lock button to change 2 chirps = 3.5 second door locks
Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock
or
Second Press and release the valet switch 2 chirps = auto locks off
Press transmitter Lock button to change 1 chirp = auto locks on
or
Third Press and release the valet switch 3 chirps = auto unlock off
Press transmitter Lock button to change 1 chirp = auto unlock drivers door only
Press transmitter Lock button to change 2 chirps = auto unlock all doors
or
Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming
Press transmitter Lock button to change 4 chirps = headlight output off
Press transmitter Lock button to change 1 chirp = headlight output when arming
Press transmitter Lock button to change 2 chirps = headlight output when disarming
or
Fifth Press and release the valet switch 2 chirps = active locks
Press transmitter Lock button to change 1 chirp = passive locks
or
Sixth Press and release the valet switch 2 chirps = active arming
Press transmitter Lock button to change 1 chirp = passive arming
or
Seventh Press and release the valet switch 2 chirps = Hardwire
Press transmitter Lock button to change 1 chirp = Hardwire
or
Question and Answer IconNeed help?

Do you have a question about the Prestige Platinum APS 996 and is the answer not in the manual?

Prestige Platinum APS 996 Specifications

General IconGeneral
Remote StartYes
Ignition KillYes
Door Lock ControlYes
Trunk ReleaseYes
Starter DisableYes
Panic ModeYes
Valet ModeYes
Shock SensorYes

Summary

INSTALLATION OF MAJOR COMPONENTS: MODULES AND SWITCHES

INSTALLATION OF MAJOR COMPONENTS: INDICATORS AND INTERFACE

INSTALLATION OF MAJOR COMPONENTS: SENSORS AND WIRING

WIRING THE 6 PIN MAIN POWER HARNESS

Detailed instructions for connecting the 6-pin main power harness wires to the vehicle.

INSTALLATION OF MAJOR COMPONENTS: AUXILIARY WIRING

WIRING THE 4 PIN AUXILIARY OUTPUT HARNESS

Explanation of the 4-pin auxiliary connector outputs for controlling various vehicle functions.

START PROGRAMMING

TESTING YOUR INSTALLATION

HOOD PIN SAFETY SHUT DOWN

Procedure to test the hood pin safety shut down feature for proper vehicle maintenance safety.

MANUAL SHUT DOWN / ENABLE CIRCUIT

Procedure to test the manual shut down/enable circuit for operator control of remote start.

NEUTRAL START SAFETY TEST

Critical test to ensure the vehicle only starts in Park or Neutral.

Related product manuals