BodyGuardian One – Instructions for Use 2
BodyGuardian One menu options
BodyGuardian One provides additional menu options that can assist you while you are
operating the device.
To access the menu options:
1. Unplug the ECG cable from the device to pause monitoring. The Insert ECG lead cable
screen is displayed.
2. Using the touchscreen, press on the MENU icon.
3. Press the menu option that you want to enable or view.
Press the INFO icon to display the following:
• Device serial number
• Software version number
• SIM card ID
• IMEI ID
• Firmware version number
Press the FLIGHT MODE icon to disable network connectivity and prevent
the device from sending data to or receiving data from the Preventice
servers. The device will still be recording ECG/heart rate data.
The icon is highlighted when the option is enabled. Press the icon again to
Press the SOUND ON/OFF icon to toggle on and off the sound from the
device (this includes audible chime alerts).
Note: Unplugging the ECG cable pauses monitoring.
To Next Page
Loading...
Need help?
General