SAFETY
3 - 3
FRONT VALVE LOCATION 12089M
These two air system emergency fill valves are
fitted with the same valve stems as standard
tires, and can be filled by any standard external
air supply line.
The rear air system emergency fill valve will
supply air for all systems (brakes, suspension
and accessories) while the front fill valve will
supply air for accessories only.
Caution: Air filled through these two points will
pass through the standard air filtering system
provided by Prévost. Do not fill air through any
other points.
Emergency Exits
Sliding Type Emergency Escape
Window
Unlatch sliding window and open completely,
then slide the screen fully open and exit vehicle
through window frame.
18049
Awning Type Emergency Escape
Window
To exit vehicle through awning type windows,
remove screen by pulling upwards on both
finger loops; take extension rod out of it's seat,
straighten out and push all the way through
window frame, then exit through window frame.
Escape window extension rods are identified by
a red end section.
18050
Emergency Roof Escape (optional)
To exit vehicle through a Prévost installed roof
escape hatch, fully push out ventilation hatch,
then while depressing black tab towards rear of
vehicle, push handle out in the same direction;
this will release emergency hatch catch.
18051
1..................................Emergency escape hatch
2...............................................Instructions decal
3......................................................Hatch handle
4............................................................ Black tab
To Next Page
Loading...
Need help?
General
