5-20 OTHER FEATURES
PA1633 X3-45 Commuter Operator’s Manual
Soot Level Gauge
From the ATS Status sub-menu, you can view the soot level for the
Aftertreatment system. When the soot level is high, regeneration is
necessary. L1, L2, L3 and L4 under the scale correspond to Level 1 up to
Level 4 (see Diesel particulate filter clogging sequence – Engine indicator
lamp).
3. Cancel REGEN
From the Aftertreatment main menu, you can cancel a REGEN cycle.
PASSWORD
Certain functions are password-protected.
These passwords give the user access to all password-
protected functions. The default password is 0000.
1/1 Password
The following menus are password-protected and marked with a key symbol in the menus:
• Change Password
• Fleet ID
• Reset Trip Data
• Fault Diagnostics
• Inactive Faults
BRAKE LINING REMAINING
The numerical values indicate the brake lining remaining in 1/32 inch,
mm or in term of percentage (%), depending on the unit selected in
Display Settings menu (new brake pads are displayed as 100% if the
unit selected is %).