Prevue Pet Products 1804TR User Manual

Triple Roof
Flight Cage
Model: # 1804TR
read first REVIEW BEFORE ASSEMBLY
• TOOLS: No tools are required. For assistance or replacement
parts, please contact Prevue
TOLL-FREE
800.243.3624
ONLINE
www.prevuepet.com
step 1 PARTS USED:
step 2 PARTS USED:
step 3
1804TR— 10/ 14— A4 Made in China for Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 customerservice@prevuepet.com
Removable tray will
already be in the base.
Place grille into base
before adding mesh.
Unfold the cage mesh unit
so that the corners make
90° right angles.
Place the cage body into the
base. Starting at one end,
align the loops on the mesh
with openings in the base.
Guide the mesh in place
between the edge and the
tabs along the inner rim
of the base.
Finish with putting the
loops into base openings on
the opposite end.
Insert two
short perches
as illustrated.
Insert two
long perches as
illustrated.
Assemble and insert two
food/water cups as illustrated.

Prevue Pet Products 1804TR Specifications

General

Product Name	Prevue Pet Products 1804TR
Category	Pet Care Product
Type	Bird Cage
Color	Black
Dimensions	18" x 14" x 18"
Bar Spacing	0.5 inches
Material	Metal

Summary

Triple Roof Flight Cage Assembly

Step 1: Parts Used

Assemble the cage base by placing the grille into the base before adding the mesh.

Step 2: Cage Body Assembly

Unfold the mesh unit and align loops with base openings, securing the cage body.

Step 3: Perch and Cup Installation

Insert perches and food/water cups into the assembled cage body.

Step 4: Roof Installation

Install the arched roof by aligning loops with the cage body mesh panels.

Step 5: Peaked Roof Installation

Attach the peaked roofs by hooking inner and outer loops onto the cage mesh.

Cleaning Instructions

Cage Care Recommendations

Use soft cloths and mild soap for cleaning; dry thoroughly to prevent warping.