Pride Mobility GOPHER - 4 Operation; Control Panel; How to Operate Your Scooter

10
4. OPERATION
4.1 CONTROL PANEL
1. Battery Level Indicator
2. Speed Dial
3. Indoor / Outdoor Switch
4. Headlights Button
5. Horn
6. Emergency lights
7. Indicator Switch
8. Wigwag Paddle
4.2 HOW TO OPERATE YOUR SCOOTER
■ Power switch
Turn the key to power ON or OFF
(ON) : Power is turned on
(OFF) : Power is turned off
■ Speed Dial
Press the slowest or fastest setting to
determine the maximum speed of the scooter.
■ Forward, Reverse, and Braking
Pull the speed control lever backwards with your right fingers and the vehicle will move
forward.
Pull the speed control lever backwards with your left fingers and the vehicle will move
backward.
The horn will beep when the vehicle is in reverse.
Release the speed control lever freely while either going forward or reverse, and the
electromagnetic brake in the motor will be activated, and the vehicle will stop.
■ Indicator Lamp Switch
The light will flash and buzzer will make a beeping sound when turning the switch to the
left or right.
Return the switch back to the middle, the indicator will be cancelled.
Slowest setting
Fastest setting