Prima Projector X2 - Power ON;OFF; Sharpness

4. Power ON/OFF
5. Sharpness
3
Turn the focus gear on the le side of the projector to adjust
the picture sharpness.
Power ON : Switch down the [ON/OFF] on the le side
of the projector and wait for the screen to display.
Turn on the device with the switch on the side and hold
down the power buon in touch screen for 5-10 seconds,
The projecon light will on immediately.
Power OFF : Switch down the [ON/OFF] on the right side
of the projector, the interface of shutdown will pop up,
click "OK" to shut down, aer the projector stops running,
please switch the[ON/OFF] up to the top, otherwise
the baery will sll be in a power-consuming state.
Projector Model: X2