Printing Slides 15
Paper Size: Default paper size is set to the maximum. Edit
these settings if you are printing to slides with a smaller print-
able area.
Orientation: Change the orientation to Portrait or Landscape.
Print Heat: Increase or decrease the Print Heat from 1-255.
Increase to print heat to improve print quality. 100 is the
default value. Sustained use of a high print heat values will
decrease the life of the print head and potentially break the
ribbon. Different manufacturers of slides may require more or
less heat. The minimum heat settings possible that result in a
good print should be used.
Rotate 180 Degrees: Flips the image up-side down . Default
setting is Yes.
Printer Information… Click here to display, printer driver ver-
sions, firmware versions, total prints, current status, remaining
slides, remaining prints and offset values.
To Next Page
Loading...
Need help?
General
