C. INDENTIFYING THE PARTS
The following illustrations show the various parts of the
printer. These parts will be referred to throughout this manual
so return here if you ever encounter a term that is unfamiliar
to you.
The Cover Release Button is a mechanical button that releases
the spring-loaded mechanism on the cover.
The Power Button turns off the printer when the cover is
closed. When the cover is open, press and hold the power but-
ton to reverse the slide rollers motors.
The Slide Button will advance any slide stuck in printer to the
Slide Bin. When the cover is open, press and hold the slide
button to advance the slide roller motors.
The Slide Bin will hold 15 Slides when it is fully ejected. Pull
the Slide Bin forward to fully eject it. A sensor will trip if more
than 15 standard 1mm slides are in the bin.
Getting Started 3
Cover Release
Button
Power Button
Slide Button
Slide Cartridge
Slide Bin
To Next Page
Loading...
Need help?
General
