24 Maintenance and Troubleshooting
3. Remove the slide cartridge.
4. In the slide cartridge compartment check near the bottom
roller for a slide.
5. Check under the ribbon. Use the Power and Slide buttons
to move the slide to a position where you can remove it.
Tip! Once the slide is on the rubber belts near the back, you
can close the cover and press the slide button to advance
the side down the slide chute.
6. If the slide is near the back and you are unable to retrieve
it using the buttons you can remove the back cover panel.
Screws for Access Panel
To Next Page
Loading...
Need help?
General
