DEC LA120 Emulation
Page 5-18
Printer Controls
Bell BEL
Causes the printer's bell to sound.
Control code: BEL
Hexadecimal: 07
Select Automatic Carriage Return ESC [ 20 h
Selects automatic carriage return mode. This causes the printer to automatically
perform a carriage return (CR) for each line feed (LF), vertical tab (VT), or form feed
(FF) that it receives. Overrides the "Auto CR:" value in the "Setup: INTERFACE"
menu.
Escape Sequence: ESC [ 2 0 h
Hexadecimal: 1B 5B 32 30 68
Cancel Automatic Carriage Return ESC [ 20 l
Cancels automatic carriage return mode. Overrides the "Auto CR:" value in the
"Setup: INTERFACE" menu.
Escape Sequence: ESC [ 2 0 l
Hexadecimal: 1B 5B 32 30 6C
Printer Identification ESC [ c
(or) ESC [ 0 c
Causes the printer to respond with ESC [ ? 2 c to identify itself as an LA120-RA
printer. (The response can only be sent if serial I/O is selected.)
To Next Page
Loading...
