ANSI X3.64 Emulation
Page 2-5
Character Attributes
Select Graphic Rendition ESC [ n m
Selects the graphic rendition n from the following table.
n Rendition
0 Normal
1 Emphasized
3 Italic
4 Underline
For italic mode to work correctly, an Epson FX font must be selected (check the
"Font:" value in the "Setup: FORM" menu). The other available fonts do not include
italic characters.
Example: The following escape sequence will select emphasized mode.
Escape Sequence: ESC [ 1 m
Hexadecimal: 1B 5B 31 6D
To Next Page
Loading...
