9
Instructions for the user
SERIAL NUMBER
SERIAL NUMBER LABEL
The serial number consists of a grey silk-screened adhesive label applied to the back of the oven.
The following data is clearly and indelibly marked on the plate:
Name of the manufacturer;
Voltage and electrical
frequency (Volt/Hz)
GENERAL INFORMATION
IMPORTANCE OF THE MANUAL
Before using the oven in question, it is mandatory to read and understand this manual in all its parts.
This manual must always be available to "authorised operators" and be near the oven, carefully kept and
stored.
The manufacturer declines all responsibility for any damage to persons, animals and property caused by
non-observance of the rules described in this manual.
This manual is an integral part of the oven and must be kept until its final disposal.
The "authorised operators" must only perform the interventions relating to their specific competence on
the oven.
“OVEN OFF" STATUS
Before carrying out any type of maintenance and/or adjustment on the oven it is compulsory to cut off the
electric power source by removing the power plug from the wall socket, making sure that the oven is
actually switched off and has cooled.
WARRANTY
The warranty duration period is valid for twelve months from the date of the original purchase receipt.
Within this period, parts that are objectively ascertainable as defective due to manufacturing defects,
excluding electrical components and parts subject to normal wear and tear, will be replaced or repaired
free of charge at our factory premises.
All shipping and labour costs are expressly excluded from the warranty.
The warranty is void in all cases in which it can be ascertained that the damage has been caused by:
transportation, inadequate maintenance, operator inexperience, tampering, repairs carried out by
unauthorized personnel, or failure to comply with manual instructions.
The manufacturer declines all liability for any direct or indirect damages resulting from the time for which
the machine is inoperative, including for the following reasons:
faults in the equipment, time spent waiting for repairs, or, in any case, absence of the equipment.
THE TAMPERING WITH AND/OR REPLACEMENT OF PARTS WITH NON-ORIGINAL
SPARE PARTS WILL VOID THE WARRANTY AND EXONERATE THE MANUFACTURER
FROM ALL LIABILITY.
To Next Page
Loading...
