CHAPTER 3 REPLACEMENT PROCEDURE 25
3.1 WORK FLOW 25
3.2 PREPARATION 26
3.3 RECEIVE SCREEN DATA FROM GP-2300 SERIES 27
3.4 CONVERT SCREEN DATA WITH THE PROJECT CONVERTER 31
3.5 CHANGE THE DISPLAY UNIT TYPE 38
3.6 TRANSFER SCREEN DATA TO GP-4301T/TW 39
3.7 DIFFERENCES OF SOFTWARE 44
3.7.1 DIFFERENCES AFTER CONVERSION 44
CHAPTER 4 COMMUNICATION WITH DEVICE/PLC 46
4.1 DRIVERS 46
4.2 SHAPES OF COM PORTS 46
4.3 SIGNALS OF COM PORTS 47
4.3.1 SIGNALS OF COM1 47
4.3.2 SIGNALS OF COM2 49
4.4 MULTILINK CONNECTION 50
4.5 INTERNAL 2-PORT FEATURE FOR MITSUBISHI PLC 50
4.6 CABLE DIAGRAM AT THE TIME OF REPLACEMENT 51
4.6.1 WHEN USING A RS-232C CONNECTION CABLE 52
4.6.2 WHEN USING A RS-422 CONNECTION CABLE 55
CHAPTER 5 APPENDIX 57
5.1 CHANGING THE SETTING OF THE EXTERNAL MEDIA TO USE 57
5/59
To Next Page
Loading...
