Overview
12
GP unit Package Contents
Note:
z For information on the package contents for the rear mount model, refer to
Package Contents (see page 172).
Overview
Verify all items listed here are present in your package:
1 GP unit: 1
2 Installation gasket: 1 (attached to the GP unit)
3 Installation fasteners: 4 per set
4 DC power supply connector: 1 (only for DC type)
*1
5 USB cable clamp Type A: 1 set (1 clip and 1 tie)
6 GP4000 Series Installation Guide: 1
7 Warning/Caution information: 1
This unit has been carefully packed with special attention to quality. However,
should you find anything damaged or missing, please contact your local distributor.
*1
You can use the DC power supply connector for GP-4200/4300/4400 series to
supply power to GP-4500/4600 series. However the reverse is not possible. You
cannot use the DC power supply connector for GP-4500/4600 series on GP-
4200/4300/4400 series.
Revision
You can identify the product revision from the product label on the GP unit. The
following diagram is a representation of Revision A. The product label indicates
Revision A with an asterisk (*) in the "A" position.
)RU
*36HULHV
)RU
*36HULHV
REV
*
BCDEFGHIJKLMNOPQRSTUVWXYZ12345
To Next Page
Loading...
Need help?
General
