Pro-face GP-4402WW - Certifications and Standards

GP-4402WW/GP-4502WW Hardware Manual
13
Certifications and Standards
Compliance Standards
Pro-face submitted this product for independent testing and qualification by third party listing
agencies.
Pro-face and these agencies have certified this product as meeting the following standards:
 Directive 2006/95/EC (Low voltage)
 Directive 2004/108/EC (EMC).
The panels are CE marked.
 EMI: EN61000-6-4
 EMS: EN61000-6-2
 EN61131-2
 IP65 (front face) - IP20 (rear)
Qualification Standards
Pro-face voluntarily tested this product to additional standards. The additional tests performed, and
the standards under which the tests were conducted, are specifically identified in Environmental
Characteristics (see page 22).
Hazardous Substances
The GP-4402WW/GP-4502WW is designed for compliance with:
 REACH, Regulation N1907/2006 on the Registration, Evaluation, Authorisation of Chemicals
This product is compliant with:
 RoHS European
 RoHS China
Hazardous Location
DANGER
RISK OF EXPLOSION IN HAZARDOUS LOCATION
Do not use this product in hazardous location.
Failure to follow these instructions will result in death or serious injury.