13/55
2.2 Touch Panel specifications
2.2.1 When replacing GP-477RE with GP-4501T
For replacing GP-477RE with GP-4501T, you can select the Matrix type (2-point
touch input at the same time same as GP-477RE) or the Analog type (1-point touch
input) for Touch Panel Type.
For the Analog type, even if you touch two points at the same time, it’s recognized
that the coordinates located between these two points are touched. If you have
used the 2-point touch input on GP-477RE, change to the 1-point touch input
setting using the switch delay function of GP-Pro EX.
There’s a model number difference between the Analog type and the Matrix type.
Before placing an order, please make sure of the model number.
2.2.2 When replacing GP-477RE with GP-4501TW
GP-4501TW adopts the Analog type.
For the Analog type, even if you touch two points at the same time, it’s recognized
that the coordinates located between these two points are touched.
If you have used the 2-point touch input on GP-477RE, change to the 1-point touch
input setting using the switch delay function of GP-Pro EX.
If you use the Matrix type that enables 2-point touch input at the same time, you
can replace GP-477RE with GP-4501T.
There’s a model number difference between the Analog type and the Matrix type.
Before placing an order, please make sure of the model number.
To Next Page
Loading...
Need help?
General
