23/55
3.3 Receive screen data from GP-477RE
This section explains, as an example, how to receive screen data from GP-477RE
using a transfer cable, GPW-CB02 or GPW-CB03. If you have backed up screen data,
this step is unnecessary; skip to the next section [3.4 Convert screen data with the
Project Converter].
(1) Connect a transfer cable to the GP-477RE unit.
(2) Start up GP-PRO/PBIII for Windows and click the [Transfer] icon on the Project
Manager (Specify a desired project file.)
(3) On the [Transfer] window, select the [Setup] menu and click [Transfer Settings…].
To Next Page
Loading...
Need help?
General
