19
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of treadmill usage information. The information
mode also allows you to select miles or kilometers as
t
he unit of measurement and to turn on and turn off the
display demo mode. You can also select an audio set-
ting for your personal trainer and adjust the volume
level.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
The lower left
corner of the dis-
play will show
the number of
hours that the
treadmill has
been operated.
The lower right
corner of the dis-
play will show the total number of miles or kilometers
that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers
will appear in the display. To change the unit of mea-
surement, press the Speed increase button.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
n
ormally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
t
he key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo mode is turned on, a
“d” will appear in the lower right corner of the display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease
button.
You can select an audio setting for your personal
trainer if desired. When you use an iFit card, a per-
sonal trainer will guide you through your workouts.
When the On setting is selected, the personal trainer
will give you detailed instructions. When the Off setting
is selected, the personal trainer will simply guide you
through your workout. To adjust the audio setting of
the personal trainer, press the Incline decrease button.
The word “ON” or “OFF” will appear in the upper left
corner of the display.
The volume level will appear in the upper right corner
of the display. To adjust the volume level, press the
Incline increase button.
To exit the information mode, remove the key from the
console.
To Next Page
Loading...
Need help?
General