1
1
12. Lower the Uprights (31, 36). Be careful to not
damage the Left and Right Base Covers (90,
9
1).
S
ee drawing 12a. Position the Uprights (31, 36)
so that the treadmill Frame (74) is centered be-
tween the Uprights.
Firmly tighten the Upright Bolts (27) and the
Frame Bolts (32) on each side of the treadmill.
Do not overtighten the Frame Bolts.
36
31, 36
32
74
74
31
View from Above
Side View
1
2
27
13. Raise the Uprights (31, 36).
Turn the Left and Right Base Covers (90, 91) to
the position shown. Slide the Base Covers down-
ward over the Base (48). If necessary, pull out on
the sides of the Base Covers to fit them over the
Wheel Bolts (14).
Lower the Uprights (31, 36).
90, 91
48
13
31, 36
14
12a
90, 91