11
11. Be careful not to pinch the wires in the Right
Handrail (105).
Attach the console assembly to the Right
H
andrail (105) with two #8 x 3/4" Screws (1), a
1/4" x 1 1/4" Bolt (6), and a 1/4" Star Washer
(10). Repeat this step on the left side of the con-
sole assembly. Start all four Screws and both
B
olts before tightening any of them.
See steps 4–9. Tighten all the bolts used in
these assembly steps.
1
10
6
Console Assembly
105
11
12. If necessary, press the Left Accessory Tray (94)
and the Right Accessory Tray (99) into the
Console Base (96).
94
99
96
12
To Next Page
Loading...
