14
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter (A).
If you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter (A) into
the receptacle on
the front of the
elliptical. Then,
plug the power
adapter into an
appropriate outlet
that is properly
installed in accor-
dance with all local codes and ordinances.
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the elliptical,
hold the upright (B), and place one foot against one of
the front wheels (C). Next, pull on the upright and have
a second person lift the rear stabilizer (D) until the ellip-
tical will roll on the wheels. Carefully move the elliptical
to the desired location, and then lower it to the floor.
A
C
B
D
HOW TO USE THE ELLIPTICAL
To Next Page
Loading...
Need help?
General
