The mixing of the stock solution tank requires an independent mixing device, which can set the
daily timing mixing function and manually sta/stop the mixing.
Irrigation Priority (system default): Prioritize
irrigation during operation, unless the water level reach-
es the lower limit or forced irrigation causes damage to
crops, such as: EC overrun, pH overrun and water
temperature overrun, under these abnormal conditions
the system will automatically Stop irrigation, and resta
irrigation after the abnormal condition is removed.
Feilizer distribution priority: Once EC or pH is
triggered during the irrigation plan, irrigation will be
stopped, feilizer distribution will be given priority, and
the target value will be reached within the specied
feilizer distribution time. This function is suitable for
users with high requirements for EC and pH range. If the
system is powered o and restaed, as long as the EC or
pH does not reach or exceed the target value, the system
will also stop irrigation.
IRRIGATION
Click [IRRIGATION] to enter the irrigation settings:
There are three modes of irrigation, namely automatic and manual stop and manual test.
Auto Cycle：You can set the opening time, closing time, and cycle eve day.
Auto Timer：Switching time and daily cycle can be set. Up to 10 groups of timers can be set.
Soil Moisture：The d humidity of the substrate is triggered, and irrigation is staed when it is
less than the target value.
Manual OFF：When turned o, does not enter the automatic setting.
15
To Next Page
Loading...