Pro-Leaf Aqua-Pro - Page 19

Note: In cycle mode, if
OFF is set to 0, it indicates that
Auqa-pro is in the irrigation
normally open state and will
not stop irrigation. In timer
mode, if the sta and end
times are set, it indicates that
Aqua-pro is in the irrigation
normally open state.
In the automatic mode, irrigation has a trigger type of
substrate dness and humidity. The substrate dness and
humidity trigger irrigation needs to be congured with a
substrate dness and humidity sensor. The user can set the
time period for this type of work. During this time period, when
the humidity of the substrate is less than or equal to the set The
system automatically stas irrigation when the humidity is
greater than or equal to the set stop value, and stops irrigation
when the humidity of the substrate is greater than or equal to
the set stop value. When the humidity of the matrix is less than
or equal to the set minimum value, the system will alarm.
16