Pro-Leaf Aqua-Pro - Configuration Setting Upper Limit Table

Conguration Setting Upper Limit Table
General Items Subitems
Minimum
congurable value
Maximum
congurable value
Note
High Alarm Value 9.99m
Greater than the
target water level
Target Water Level
Less than the high
alarm value
Greater than the sta
water level
Sta Water Level
Greater than the low
alarm value
less than the target
water level
Less than the sta
water level value
Low Alarm Value 0
Automatic water
replenishment timeout
999mins
If it is 0, it means
no eect
0
Circulating Water Waiting
Time
999mins
If it is 0, it means
no eect
0
Target Value
Less than the high
alarm value
Target
Greater than (low
alarm value + safety
inteal value)
Deadband
Less than ((high
alarm value - low
alarm value)/2)
Greater than 0 (EC)
High Alarm Value Less than 6.00 (EC) High Limit
Greater than (target
value + safety inteal)
Single lling time (seconds) 999
EC single Dosing
time
0
Inteal value (seconds) 9999
EC single Dosing
time
0
High alarm value ＜6.00（EC） High Limit
Greater than (target
value + safety inteal)
Single Dosing time 9990
Inteal time value 99990
Maximum number of cycles
for adding liquid
Max Dosing
Cycles
9990
Periodic table days setting
(days)
0 days means the
stage is skipped
900
Working ratio of EC
peristaltic pump (%)
Peristaltic pump
No. 2-8, No. 1
xed at 100%, pH
10010
Low Alarm Value
Less than (high alarm
value - deadband
value)
Low LimitGreater than 0 (EC)
The maximum number of
cycles of liquid addition
(times)
999
Max Dosing
Cycles
0
Target Value
Less than the high
alarm value
Target
Greater than (low
alarm value + safety
inteal value)
Deadband
Less than ((high
alarm value - low
alarm value)/2)
Greater than 0 (pH)
Low alarm value
Less than (high alarm
value -deadband
value)
low LimitGreater than 0 (EC)
Water Level
EC
Feilizer Ratio
Periodic Table
pH
32