Accessories
Aluminum Tripod
The model T2 adjustable aluminum tripod provides a stable platform for
outdoor or indoor work. Allowing a beam height from approximately 4
feet to 6 feet above the surface it rests on, the T2 is an excellent choice for
typical construction setups. The T2 is a flat head tripod with a 5/8-11
male mounting thread.
Aluminum Grade Rod
The model GR2 grade rod is a 14 foot long, 4 section aluminum grade
rod available in either Feet / Inches / Eighths of an inch, or Feet /
Tenths / Hundredths of a foot.
Ceiling Bracket
The CB bracket replaces the fixed "Y" shaped part of the optional VM2
mount to allow height adjustment for T-bar ceiling setups and more
flexibility for vertical setups. If you often do T-bar ceiling work, or need
more precise vertical adjustability than the basic mount provides, this
bracket will be a great addition to your system.
Magnetic Target
The MT1 magnetic target is used to display the visible beam of the
L3
and provide a relative position indication. Used when installing T-bar
ceiling and steel stud wall framing, the magnetic target allows hands free
alignment.
B5X Rechargeable Battery Kit
On the lower section of its housing, the
L3
has a built-in jack for
recharging batteries. The B5X rechargeable battery kit provides two
industrial grade NiMh batteries and a battery charger designed for a 16
hour charge time. NiMh batteries provide approximately 2/3 the
operating time of alkaline batteries and they are an environmentally
friendly upgrade for your system.
13
!
CHARGE ONLY
RECHARGEABLE
BATTERIES
To Next Page
Loading...