Pro-Weld CD-212 - Check List CD-212 System P.n. 100-0112; Check List CD-212 System P.n. 100-0113

CD-212
PRO WELD
18.0 CHECK LIST CD - 212 SYSTEM PT. NO. 100 - 0112
STANDARD CD - 212 WELDING SYSTEM COMPLETE WITH B - COLLET GUN
AND 25’ #4 GROUND CA BLE
ITEM DESCRIPTION PART # QTY
1. CD - 212 CONTROLLER 110 VAC 200-0015 1
2. GUN ASSY. B - COLLET w/INTEGRAL 2 5 FT.WELD
& CONTROL CABLE 2 - LEGS, and FOOTPIECE 300-0100 1
3. GROUND CABLE #4 X 15’ 125-0100 1
4. MANUAL, Operation and Maintenance CD -212 1
5. HEX WRENCH SET 1
19.0 CHECK LIST CD - 212 SYSTEM PT. NO. 100 - 0113
STANDARD CD - 212 WELDING SYSTEM COMPLETE WITH TAPER TIP GUN
AND 25’ #4 GROUND CABLE
ITEM DESCRIPTION PART # QTY
1. CD - 212 CONTROLLER 110 VAC 200-0015 1
2. GUN ASSY. TAPER TIP w/INTEGRAL 25 FT.WELD
& CONTROL CABLE 2 - LEGS, and FOOT PIECE 300-0101 1
3. GROUND CABLE #4 X 15’ 125-0100 1
4. MANUAL, Operation and Maintenance CD-212 1
5. HEX WRENCH SET 1
Page 20