6
Connecting the TV
1. Connecting the power supply
Connect the power supply to the DC 12V port of the TV. Connect the
power plugto the power socket.
If using the TV in a vehicle, use the supplied travel adapter and
connect it to the DC 12V port. Connect the travel adapter to the 12 V
socket of the vehicle (”cigarette lighter”).
2. Connecting the TV to a household or stationary antenna
Connect the supplied antenna adapter to the ANT port of the TV then
connect the antenna adapter to the antenna wall socket or antenna
cable.
3. Using the travel antenna
Connect the magnetic travel antenna to the ANT port of the TV. Move
the travel antenna as needed to ensure a good reception.
4. Using the AV adapter
Connect the video cable a separate component video bundle
(sold separately) to the supplied AV adapter’s yellow end. Connect
the sound components to the white (left channel) and black (right
channel) leads. Finally, connect the AV adapter to the 3.5 mm AV IN
jack. This will enable you to watch material from an external DVD player
on your Procaster DTV007.
By connecting the AV adapter to the AV OUT jack you can watch DVB
from the Procaster DTV007 on another screen.
To Next Page
Loading...
