Need help?Do you have a question about the Proceq Equotip Bambino 2 and is the answer not in the manual?
General| Brand | Proceq |
|---|---|
| Model | Equotip Bambino 2 |
| Category | Test Equipment |
| Language | English |
Manual contains important information on the safety, use and maintenance of the instrument.
Proceq's terms and conditions apply; warranty and liability exclusions are detailed.
Guidelines for instrument operation, emphasizing supervision and avoiding external influences.
Explanation of icons used in the manual, such as Danger and Note symbols.
Explains the Leeb hardness measurement principle using an impact body and rebound.
Requirements for sample preparation, including weight, thickness, and surface condition.
Step-by-step instructions for performing a hardness test using the device.
Procedure for verifying the instrument's functionality and accuracy.
Troubleshooting steps for battery-related issues and charging problems.
Steps to remove default drivers before installing the supplied USB drivers.
Steps to take if the device display shows no indication or is blank.
Handling and resolving issues related to data transfer interruptions.
Instructions on how to reset the instrument to its default settings.
Diagnosing and resolving issues causing inaccurate measurements or failed checks.
Explanation of various error codes and recommended solutions.
Safety and liability considerations specific to the Piccolink software.
Step-by-step guide for installing the Piccolink software on a computer.
Instructions for installing the necessary USB driver for device communication.
How to connect the Equotip device to the computer and establish communication.
To Next Page
