Need help?Do you have a question about the Proceq N / L and is the answer not in the manual?
General| Brand | Proceq |
|---|---|
| Model | N / L |
| Category | Test Equipment |
| Language | English |
Provides basic information about the concrete test hammer and safety regulations.
Outlines warranty and liability claims based on general terms and conditions.
Lists general safety rules and unauthorized operator restrictions.
Explains icons used for danger and warning notes in the instructions.
Lists international and regional standards applied to the product.
Explains how the device measures rebound value and factors affecting it.
Details the steps for performing test impacts and using the hammer.
Explains how to read and interpret rebound values from the device.
Explains how to determine the median value from measured data.
Introduces conversion curves for estimating compressive strength.
Presents four new conversion curves developed in Japan.
Details factors that influence measured rebound values.
Discusses how concrete age and carbonation affect rebound values.
Details circumstances leading to deviations from normal conversion curves.
Recommends preparing separate conversion curves for special cases.
Describes how to perform a check on the device's calibration and function.
Provides instructions on how to clean the concrete test hammer.
Details the procedure for replacing the recording paper roll.
Gives guidance on storing the concrete test hammer properly.
Outlines the recommended schedule and method for checking wear.
Provides instructions and warnings for disassembling the hammer.
Details the cleaning process for various parts of the hammer.
Explains the steps to reassemble the concrete test hammer.
Lists the items included in the delivery for different models.
Lists available accessories and their article numbers.
Provides key technical specifications like impact energy and measuring range.
To Next Page
