Need help?Do you have a question about the Proceq DIGI-SCHMIDT 2000 ND and is the answer not in the manual?
General| Model | DIGI-SCHMIDT 2000 ND |
|---|---|
| Type | Concrete Test Hammer |
| Display | Digital |
| Power Supply | 4 x AA batteries |
| Impact Energy | 2.207 Nm |
| Resolution | 0.1 N/mm² (MPa) |
| Accuracy | ±1 N/mm² (MPa) |
| Memory | 1000 measurements |
| Operating Temperature | -10 to +50 °C |
| Material | Aluminum housing |
Basic information on the product's design, safety regulations, and intended use.
Details on warranty and liability claims and their limitations.
Guidelines for proper operation, maintenance, and handling of the device.
Steps to connect the test hammer cable and transfer/printer cables.
Instructions for powering on the display unit and initial checks.
Setting the direction of impact for automatic rebound value correction.
Calculating and displaying the mean rebound value from test impacts.
Entering a number for the measurement series, auto-incremented.
Selecting the unit for displaying concrete compressive strength.
Step-by-step guide for performing test impacts on concrete surfaces.
Procedures for cleaning the concrete test hammer and display unit after use.
How to perform a performance check of the concrete test hammer.
Lists the contents included in the package for Model ND and Model LD.
Explains the methodology behind the standard conversion curves.
Presents standard conversion curves for Model ND and Model LD.
To Next Page
