Need help?Do you have a question about the Proceq Equotip Series and is the answer not in the manual?
General| Brand | Proceq |
|---|---|
| Model | Equotip Series |
| Category | Test Equipment |
| Language | English |
Instructions for installing the battery by removing the protection foil and lifting the stand.
The battery requires an initial 8-hour charge via the power supply connection.
Details on connecting probes using snap-in connectors or USB Host.
Utilize snap-in connectors for Leeb and UCI probes.
Connect Leeb Probes using the Snap-in connector 1.
Connect UCI Probes using Snap-in connectors 1 or 2.
Connect the Portable Rockwell Probe using the USB Host connector.
Power on the instrument by pressing the Power ON/OFF button.
Check for firmware upgrades before initial use of the instrument.
Access the measurement screen for taking readings.
Configure application settings and device parameters.
Manage saved measurements via the file manager.
Utilize predefined workflows to enhance process reliability.
Access comprehensive operating instructions and device details.
Configure interface language, date, time, and system settings.
Procedure to switch off the device.
Install the Equotip Link software provided on the DVD.
Connect the instrument to a PC using the provided USB cable.
Click the PQ-Upgrade icon to check for software updates.
To Next Page
