Proceq ZAA 2300 - 9 Technical specifications

Page 27
9 Technical specifications
Version
Drawing speed
Tolerance of
drawing speed
Resolution
Proceq ZAA
2300
0-99 mm/s
0 - 90 mm/s: ±1 %
1 mm/s
Proceq ZAA
2300.H for
heatable plates
> 90 mm/s: ±3 %
Proceq ZAA
2300.F
0-247.5 mm/s
0 - 225 mm/s: ±1 %
2.5 mm/s
Proceq ZAA
2300.FH for
heatable plates
> 225 mm/s: ±3 %
Proceq ZAA
2300.FF
0-495 mm/s
0 - 450 mm/s: ±1 %
5 mm/s
Proceq ZAA
2300.FFH for
heatable plates
> 450 mm/s: ±3 %
Material: Aluminium, red anodised
Double-sided glass plate: glass
Rubber coated cotton (printing blanket)
Polyester (polyester mat)
Dimensions (LxWxH): Apparatus: 565 mm x 382 mm x 190 mm
(22.2” x 15” x 7.5”)
Glass plate: 553 mm x 300 mm x 15 mm
(21.8” x 11.8” x 0.6”)
Weight: complete: 20 kg (44.1 lbs)
(Glass plate 6.4 kg(14.1 lbs))
Application length: 1 - 400 mm (0.04” – 15.7”)
Application width: up to 300 mm (11.8”) (depending on applicator)
Substrate thickness: up to maximum 11 mm (0,43”)
Power supply: 100 V –240 V / 50 Hz – 60 Hz
Power: 25 VA
Fuse: T 0.8 A / 250 V
Standards: depending on used accessories: ASTM D823
0-Directives: EN 61010-1:2001, EN 61326:1997/A1:1998