Page 5
1 Deiscription of device
Automatic laboratory equipment for accurate and reproducible application of coating
materials, adhesives and similar products with almost all film applicators.
Field of application:
• Laboratory apparatus for the paint, printing and adhesive industries, as well as
for research and development and the chemical industry in general.
• For quality control and for research and development.
• For the preparation of uniform layers independent of the individual user.
In particular, this apparatus has the following features:
• Multifunctional use with reversible, double sided glass plate: on one side
printing blanket for wire-bar applicators and profile applicators, on the other
side glass surface for other applicators, to be turned simply and without tool.
• Adjustable application area with adjustable start and stop positions.
• Also suitable for use with different applicators up to the maximum outer width
of 300 mm (11.81”), profile rods and wire-bar applicators with a minimum
length of 340 mm (13.39”) and a maximum diameter of 13.5 mm (0.53”) in the
support area.
• Also suitable for thick substrates up to 11 mm (0.43”).
• Optional precision-vacuumplate for fixing thin substrates of different sizes; the
object to be held will be fixed absolutely plane by the suction power.
• Optional modification set equipped with isolation plate for use with heatable
precision-vacuumplates or heating plates.
• Easy to handle.
• Reliable results.
• Special customer versions are available on request.
To Next Page
Loading...
