Processor Technology SHC Series - Page 8

M-62-04 SHC-1.4-61RQH-R-0070 Manual
Revision - Date: 02 – 09/23/2015
7
HEATER SPECIFICATIONS:
Product
SHC
Series Inline Heater, model SHC-1.4-61RQH-R-0070
Approvals
CE, UL 499
Wattage
1400 watts
Voltage
480 VAC, single phase, 50/60Hz
Dimensions:
Refer to facilities print for specific heater dimensions
Wetted surfaces:
PFA
Operating temperatures:
Process inlet
Process outlet
Up to process outlet temperature
Up to 80°C (176°F), depending upon operating conditions
Ambient Air Temperature
-30°C (-22°F) to 60°C (140°F)
Flow Rate
Minimum
Maximum
50 ml/min (0.013 gpm)
300 ml/min (0.079 gpm)
Pressure Rating
at 60°C
at 80°C
3.1 bar (45 psi)
2.7 bar (40 psi)
Core Sensors
(2) 100 ohm 3-wire RTDs
Thermal Cut-Off Device
bi-metallic switch, open at 90°C (194°F)
Housing Material
Flame-Retardant Polypropylene
Housing Purge (optional)
Nitrogen gas supplied 28-57 l/hr (1-2 scfh) at 13.8 kPA (2 psi) max
Table 2: Heater Specifications