5.Maintenance Plan
Maintenance Schedule
1. Shake White Ink Bottle: To prevent white ink from settling, please shake the white ink bottle
every day.
2. Nozzle Test (Check): Perform a nozzle test before sending a print ob to ensure that you get
good quality prints every time. Poor nozzles result in banding or over spray in the prints. Continue
Printing if you can get 90% of the channels nozzles.
3. Head Cleaning: Perform this task when you are getting less than 90% of the channels nozzles.
Perform Head cleaning is crucial to drain the capping station top and wipe the print head surface
for nozzle test and or printing. After the head cleaning is done,perform a nozzle check to see if you
can get 90% of the channels nozzles.
4. Power ink flush: Perform this when you notice any big missing nozzles or more than 50% of
channels are missing, use a syringe to draw 5 ml of ink from the ink sac and 10-20 ml of ink from
the waste ink tube, and then perform a Power Ink Flush task.
Daily Beginning of the
Day
Clean Capping Station Top
Flush Capping Station Top
To Next Page
Loading...
