Need help?Do you have a question about the Procolored A4 DTF and is the answer not in the manual?
Details the function of primary buttons like Start, Ink, and Paper for controlling printer operations.
Explains the usage of specific buttons (OK, Set, Minus) on the temperature controller for adjustments.
Guides on correctly installing the waste ink bottle before operating the printer.
Instructions for connecting the printer to a power source using the provided cord.
Details on powering on the printer and waiting for the initial system self-test.
Instructions for using a test film to check machine performance and print quality.
Procedure for adding ink into the printer's ink tanks, emphasizing correct color placement.
Steps for properly closing and securing the ink tank cover after refilling.
Instructions for installing the printer drivers, including accepting prompts and completing the installation.
Guidance on selecting the USB connection type when setting up the printer.
Instructions on inserting the software dongle required for the RIP software to function.
Steps for installing the PRO RIP software, following on-screen prompts for completion.
Instructions on configuring the print area dimensions within the RIP software.
Guidance on choosing the appropriate printer driver within the RIP software interface.
Steps for installing the necessary color curves for accurate printing.
Specific instructions for installing the L805 color curve file.
Steps to import image files into the RIP software for printing preparation.
Guidance on enabling the mirror print option, crucial for DTF printing.
Process of applying hot melt adhesive powder to the printed PET film.
Instructions for baking the film with powder at a specific temperature and duration.
Pre-pressing the garment at a set temperature and time before applying the transfer.
Final pressing step to transfer the design from the PET film to the garment.
Instructions on removing the PET film from the garment after it has cooled down.
Accessing software options to perform print head cleaning and maintenance routines.
Procedure for printing a test strip to check nozzle status and print quality.
Routine cleaning of the raster strip to ensure accurate print head movement.
Lubricating and cleaning the guide rail for smooth movement of the ink carriage.
Cleaning the waste ink pump to remove accumulated ink residue and prevent clogs.
Cleaning the ink cart sensor for accurate ink level detection and printer operation.
General| Brand | Procolored |
|---|---|
| Model | A4 DTF |
| Category | Printer |
| Language | English |
To Next Page
