www.usapr ocom.com
13200158-02A
INSTALLATION
Figure 14- Gas Connection
Trap
Tee
Pipe
Figure 15 - External Regulator
with Vent Pointing Down
WARNING: Test all gas piping
and connections for leaks after
installing or servicing. Correct
all leaks at once.
WARNING: Never use an open
ame to check for a leak. Apply
a noncorrosive leak detection
uid to all joints. If bubbles form,
there is a leak. Correct all leaks
at once.
CHECKING GAS CONNECTIONS
PRESSURE TESTING GAS SUPPLY
PIPING SYSTEM
Test Pressures In Excess Of 1/2 PSIG
(3.5 kPa)
To Next Page
Loading...
