EasyManua.ls Logo

Procom MG1TIR User Manual

Procom MG1TIR
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VENT-FREE GAS WALL
HEATER
OWNER’S OPERATION AND
INSTALLATION MANUAL
INFRARED MODELS
MG1TIR, MG2TIR, MG3TIR
MG2TIR-BB, MG3TIR-BB
WARNING: If the information in this manual is not
followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life.
Do not store or use gasoline or other ammable va-
pors and liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Immediately call your gas supplier from a neighbors
phone. Follow the gas suppliers instructions.
If you cannot reach your gas supplier, call the re
department.
Installation and service must be performed by a quali-
ed installer, service agency or the gas supplier.
WARNING: This appliance is equipped for Natural and
Propane gas. Field conversion is not permitted other than
between natural or propane gases.
MG3TIR
Shown
PFS
®
US
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 1-866-573-0674, 8:00 am - 4:45 pm CST,
Monday through Friday or email contact@usaprocom.com
Question and Answer IconNeed help?

Do you have a question about the Procom MG1TIR and is the answer not in the manual?

Procom MG1TIR Specifications

General IconGeneral
BrandProcom
ModelMG1TIR
CategoryGas Heater
LanguageEnglish

Summary

SAFETY

Critical Safety Warnings

Essential safety precautions and warnings for heater operation and installation.

QUALIFIED INSTALLING AGENCY

SPECIFICATIONS

PREPARING FOR INSTALLATION

UNPACKING

AIR FOR COMBUSTION AND VENTILATION

INSTALLATION

Installation Location Restrictions

Prohibited locations and clearance requirements for heater installation.

Gas Selection and Connection

Procedures for choosing and connecting the correct gas type to the heater.

Natural Gas (NG) Connection

Specific steps for connecting the heater to a natural gas supply.

Connecting to Gas Supply

Comprehensive guide for connecting the heater to the main gas supply line.

Checking Gas Connections for Leaks

Methods for testing all gas connections for proper sealing.

Pressure Testing Heater Connections

Procedure for pressure testing the heater's gas connections for leaks.

Pressure Testing Gas Supply Piping

Procedure for pressure testing the gas supply piping system.

Clearances to Combustibles

Required minimum distances from the heater to flammable materials.

OPERATION

Safety Precautions Before Lighting

Essential safety checks and warnings before attempting to ignite the pilot.

Emergency Gas Leak Procedure

Critical steps to take if a gas leak is detected in the vicinity.

Pilot and Burner Lighting

Step-by-step guide for safely lighting the pilot and main burners.

ELECTRICAL CONNECTION

INSPECTING BURNERS

CARE AND MAINTENANCE

Main Burner Cleaning

Procedures for inspecting and cleaning the main burner flame holes.

Pilot and Injector Holder Cleaning

Instructions for cleaning the burner injector holder and pilot air inlet.

MAINTENANCE OF BLOWER MOTOR (IF EQUIPPED)

TROUBLESHOOTING

Gas Leak Safety and Detection

Critical safety steps for handling gas leaks, including immediate actions.

Pilot Flame Extinguishes

Diagnosing why the pilot flame goes out after the control knob is released.

Pressure Switch Function and Bypass

Explanation of the pressure switch and how to bypass it for natural gas.

REPLACEMENT PARTS

SERVICE HINTS

WARRANTY

Product Registration and Information

Instructions and benefits of registering the product with the manufacturer.

Related product manuals