3. Overview
The Procon MelCOMMS MINI is a standalone controller for run/standby (backup and rotate) functionality for between 2
and 8 indoor units, connected via MelcoBEMS MINI (A1M) interfaces.
Compatible Air-To-Air model numbers can be found in Appendix A of this document.
Figure 1 shows the MelCOMMS MINI dimensions.
Figure 2 shows the MelCOMMS MINI wiring diagram for connections to an external fault relay, high temperature alarm
relay and multiple MelcoBEMS MINI (A1M) units.
Figure 3 gives information on how to configure the MelcoBEMS MINI (A1M) units.
To Next Page
Loading...
