Need help?Do you have a question about the Procon VLD 22 and is the answer not in the manual?
Details requirements for installing the frequency converter, including IP rating and ventilation.
Crucial safety warnings regarding electrical hazards during installation and operation.
Warning about potential unexpected motor startup and safety measures.
Safety warnings related to fire risks and incorrect wiring.
Safety measures and recommendations for connecting the main power supply.
Safety measures and recommendations for connecting the motor to the converter.
Safety measures for connecting the protective earth ground wire.
Safety measures for wiring the control signals and using shielded cables.
Details the 4x16 character display and push buttons for programming.
Details requirements for installing the frequency converter, including IP rating and ventilation.
Crucial safety warnings regarding electrical hazards during installation and operation.
Warning about potential unexpected motor startup and safety measures.
Safety warnings related to fire risks and incorrect wiring.
Safety measures and recommendations for connecting the main power supply.
Safety measures and recommendations for connecting the motor to the converter.
Safety measures for connecting the protective earth ground wire.
Safety measures for wiring the control signals and using shielded cables.
Details the 4x16 character display and push buttons for programming.
General| Category | Media Converter |
|---|---|
| Wavelength | 1310nm |
| Transmission Distance | 20km |
| Operating Temperature | 0°C to 50°C |
| Fiber Type | Single Mode |
| Power Supply | 5V DC |
| Interface | SC |
To Next Page
