Prodigit 3354F User Manual

90 PRODIGIT
[STATe
：
] SENSe{SP}{ONOFFAUTO}
Syntax： [STATe：] SENSe{SP}{ONOFFAUTO }{；NL}
[STATe：] SENSe ？ {；NL}
Purpose：Set and read the Load voltage to read whether is carried by the VSENSE or
not.
Description：This command is for setting the Load voltage to read whether is carried by
VSENSE or INPUT Connector. When setting for ON, the voltage is got
from VSENSE, and setting for OFF, the voltage is got from INPUT
Connector. In 3350F, the optional are ON and AUTO. So, if setting for
AUTO, it means the voltage is got and read from VSENSE. But if no
voltage is inputted from VSENSE, the voltage will be inputted from INPUT
Connector.
[STATe
：
] LEVel {SP}{HIGHLOW} or LEV {SP}{HIGHLOW}
Syntax： [STATe：] LEVel {SP}{HIGHLOW }{；NL}
[STATe：] LEVel ？ {；NL}
[STATe：] LEV{SP}{HIGHLOW}{；NL}
[STATe：] LEV？ {；NL}
Purpose：Set and read the LOW and HIGH of Load
Description：LEV LOW is a low level value of current on CC mode. It is a low level
value of resistance on CR mode. It is a low level value of voltage on CV
mode. It is a low level value of power on CP mode.
[STATe
：
] DYNamic{SP}{ONOFF}
Syntax： [STATe：] DYNamic{SP}{ON OFF}{∣ ；NL}
[STATe：] DYNamic ？ {；NL}
Purpose：Set and read whether the status is Dynamic or Static of Load
Description：1. DYN ON , set for a DYNAMIC Load
2. DYN OFF, set for a STATIC Load
[ STATe
：
] CLR
Syntax：[ STATe：] CLR{；NL}
Purpose： Clear the error flag of 3350F which during the period of working
Description：This command is for clearing the contents in the register of PROT and
ERR. After implementation, the contents of these two registers will be “0”.
[STATe
：
] NG
？
Syntax： [ STATe：] NG？{；NL}
Purpose：Query if there have NG flag in this 3350F
Description：Set command NG？to show the NG status. Set for “0” the LCD of NG(NO
GOOD) will be put out .Set for ”1” the LCD will be lit. -

Prodigit 3354F Specifications

General

Brand	Prodigit
Model	3354F
Category	Power Supply
Language	English