7) Mains AC IEC standard power input.
TECHNICAL SPECIFICATIONS
Model
APW 1000 APW 2000 APW 3000
480x2 @ 2Ω 800x2 @ 2Ω 1400x2 @ 2Ω
300x2 @ 4Ω 450x2 @ 4Ω 750x2 @ 4Ω
Output RMS Power in
Watts – MONO or
STEREO modes
205x2 @ 8Ω 310x2 @ 8Ω 575x2 @ 8Ω
300x2 @ 4Ω 450x2 @ 4Ω 750x2 @ 4Ω Output RMS Power in
Watts - BRIDGED mode
205x2 @ 8Ω 310x2 @ 8Ω 575x2 @ 8Ω
Input connectors Balanced XLR & 6.3mm (1/4”) TRS jack -
unbalanced connection by 6.3mm (1/4”) TS jack
Input impedances 20-kOhm balanced
10-kOhm unbalanced
Frequency response 25Hz – 25KHz (+0, -1dB)
Output connectors
Speak-on connectors wired:
1+ (hot) & 1- (cold) for Stereo and Mono modes
1+ (hot) & 2+ (cold) for BRIDGED mode
THD & SMPTE IMD <0.03% @ 8Ω
Signal to noise ratio >100dB below rated power @4Ω
Sensitivity 1.15V (+3.4dBu @ 4Ω)
AC power 115 V AC or 230 V AC
Dimensions (WxDxH) 483x400x89 mm. - 19.0x15.7x3.5 in
Weight 19.8Kg – 43.6
lbs
22Kg – 48.5 lbs 25.5Kg – 56.2 lbs
To Next Page
Loading...
