PROEL PSW2600 - General Technical Specifications

POWER OUTPUT LEVEL (RATED POWER)
Output power (THD<1% 20Hz-20kHz)
Stereo 8+8ohm
Stereo 4+4ohm
Bridge mono 8ohm
Output power (THD<0,1% 20Hz-20kHz)
Stereo 8+8ohm
Stereo 4+4ohm
Bridge mono 8ohm
Distortion (THD+N)
Stereo 4+4ohm
Total harmonic distortion (THD+N) half power
20Hz-20kHz
Frequency response (-1dB)
Input sensitivity
Input impedance
Damping factor
S/N ratio (20Hz-20kHz)
Band pass (half power)
Input connectors
Output connectors
Indicators (LED) SIGNAL
PEAK
DC PROT
TEMP
BRIDGE
POWER ON
Protections
Power supply
Max power consumption
Dimensions (WxHxD)
Weight
Shipping
Accessories
11
SPECIFICHE TECNICHE GENERALI
TECHNICAL DATA
ESPECIFICACIONES TECNICAS
PSW SERIES
PSW2600
700W rms
1300W rms
2000W rms
650W rms
1200W rms
1800W rms
Less than 0,01% THD
Less than 0,1%
20Hz- 20kHz
+4dB/40x (32dB)
20kOhm balanced / 10kOhm unbalanced
≥ 500 @ 8Ohm
≤ 104 dB
10Hz - 30kHz (THD+N=1%)
XLR-M and XLR-F
SPK4MP (1+/1-) and Binding posts
Green/Orange
Red
Red
Red
Red
Blue
DC - Thermal - Soft Start - Short Circuit -
Over Load - OSC Output Sense Clipping
(switchable)
230V AC - 50Hz / 117V AC - 60Hz
16A - 230V / 4Ω
483 x 88,3 x 475mm
12kg /
14Kg / 0,072cbm
Power cord – Owner’s manual
PSW1800
500W rms
900W rms
1200W rms
400W rms
800W rms
1200W rms
Less than 0,01% THD
Less than 0,1%
20Hz- 20kHz
+4dB/40x (32dB)
20kOhm balanced / 10kOhm unbalanced
≥ 500 @ 8Ohm
≤ 104 dB
10Hz - 30kHz (THD+N=1%)
XLR-M and XLR-F
SPK4MP (1+/1-) and Binding posts
Green/Orange
Red
Red
Red
Red
Blue
DC - Thermal - Soft Start - Short Circuit -
Over Load - OSC Output Sense Clipping
(switchable)
230V AC - 50Hz / 117V AC - 60Hz
13,5A 230V / 4Ω
483 x 88,3 x 475mm
11kg
13Kg / 0,072cbm
Power cord – Owner’s manual
All specification subject to change without notice.