12
4.4 R/Flash interruption duration:
When pressing the R button, the phone connection will be briey interrupted. This inter-
ruption allows the switchboard you’re connected with to perform an action, such as con-
necting a waiting call or forwarding a call to another phone (ask your telephone network
provider or the supplier of your switchboard). You can set the interruption the R/Flash
function as follows:
press the OK button
use the and buttons to select the option [ SET FLASH ]
press the OK button
use the and buttons to set the desired interruption dura-
tion (100mS, 120mS, 300mS or 600mS)
the default interruption duration set upon leaving the factory is
100mS or 120mS.
press the OK button
nally, briey pick up the receiver and put it back down to
leave the settings
OK
OK
OK
To Next Page
Loading...
